Switch Smart Electrical / Sandhurst GU47

Electrician in Sandhurst.

Consumer units, rewires, EICRs, fault finding, lighting and EV chargers for homes and landlords in Sandhurst, Camberley, Bracknell and Ascot. Every job tested and certified.

  • Based Sandhurst GU47
  • Work to BS 7671

How a job runs

Five steps, from the first photo to the certificate

The same order every time, whether it is one extra socket or a rewire. Keep the certificates from steps four and five: a buyer’s solicitor will ask for them when you sell.

Schedule of work

Switch Smart Electrical LtdWork to BS 7671

  1. 01

    Photo or call

    Send a photo on WhatsApp, call, or use the enquiry form. Tell us the postcode and what you would like done.

    You getA reply, and a visit if the job needs one

    Done
  2. 02

    Visit and written quote

    We look at the board, the circuits and the job, then put the price and what it covers in writing.

    You getA written quote, with a programme for the work

    Done
  3. 03

    The work

    Done to BS 7671, the IET Wiring Regulations. Tidy, with the power off only when it has to be, and cleared up before we go.

    You getThe job described in the quote

    Done
  4. 04

    Test and certify

    Every circuit we work on is tested: continuity, insulation resistance, polarity, earth fault loop impedance, and RCD operation.

    You getThe readings, recorded on the certificate

    Done
  5. 05

    Certificate and notification

    The certificate for the work is issued. Notifiable work is notified to building control under Part P.

    You getAn EIC or Minor Works certificate, and a Building Regulations compliance certificate where the work is notifiable

    Done
New circuits, rewires, boards
Electrical Installation Certificate
Small additions
Minor Works Certificate
Inspections
Condition report (EICR)

Wiring check

Find out what your wiring needs

A few plain questions about the house and the fuse board, and a straight answer about whether an inspection is due and what to look out for.

It is not a substitute for an inspection, and it says so. When you are done, you can send your answers to us in one go.

Areas

Sandhurst and the towns around it

Based in Sandhurst, GU47, working across the corner where Berkshire, Surrey and Hampshire meet. Put in a postcode to see how far it is and which council looks after building control there.

Also covered: Crowthorne, Owlsmoor, Yateley, Blackwater, Frimley, Finchampstead, Wokingham, Binfield, Warfield, Bagshot, Windlesham, Lightwater and Farnborough. All areas

Map of the area around SandhurstSandhurst in the middle, with rings at 1, 3, 5 and 7 miles. Camberley is 2.6 miles east, Bracknell 5.3 miles north-north-east and Ascot 7.1 miles north-east. Also marked: Crowthorne, Owlsmoor, Yateley, Blackwater, Frimley, Finchampstead, Wokingham, Binfield, Warfield, Bagshot, Windlesham, Lightwater and Farnborough. BERKSHIRE SURREY HAMPSHIRE 1 MI 3 MI 5 MI 7 MI N Yateley Owlsmoor Blackwater Crowthorne Finchampstead Camberley GU15 Frimley Farnborough Wokingham Bagshot Bracknell RG12 Binfield Lightwater Windlesham Ascot SL5 Warfield Sandhurst GU47
Fig. 2Towns at their true bearing from Sandhurst. Distances are stretched near the middle so the close places have room; the rings give the real miles.

Who we are

Set up in Sandhurst in 2023

Switch Smart Electrical Ltd was set up in Sandhurst in 2023 by Scott Gibson. Ollie Smith joined him as a director in 2024. Between them they do the electrical work for homes and landlords in Sandhurst, Camberley, Bracknell and Ascot, and small commercial work for shops and offices.

The way we work is simple to describe. You get the price in writing before anything starts. The work is done tidily and to the regulations. Every job is tested and certified, and anything notifiable is notified, so the paperwork is right when you come to sell.

More about Switch Smart

How we workEvery job

Quotes
In writing, after a look at the job
On site
Tidy work, cleared up before we leave
Standard
BS 7671, the IET Wiring Regulations
Testing
Every job tested and certified
Building control
Notifiable work notified under Part P

Directors: Scott Gibson, Ollie Smith. Company 14736582.

Questions

Common questions

Something else on your mind? Ask us, or send a photo on WhatsApp.

Which areas do you cover?

Sandhurst, Camberley, Bracknell and Ascot, and the places around them: Crowthorne, Owlsmoor, Yateley, Blackwater, Frimley, Finchampstead, Wokingham, Binfield, Warfield, Bagshot, Windlesham, Lightwater and Farnborough. If you are not sure, put your postcode into the checker on the areas page.

Do you give written quotes?

Yes. For anything more than a small job we come and look first, then put the price and what it covers in writing. A programme for the work comes with the quote, so you know what will happen and in what order.

What certificate will I get?

It depends on the work. A new circuit, a rewire or a new consumer unit gets an Electrical Installation Certificate. A small addition to an existing circuit, such as an extra socket, gets a Minor Electrical Installation Works Certificate. An inspection of an existing installation produces an Electrical Installation Condition Report (EICR).

Does the work have to be notified to building control?

Some of it does. Under Part P of the Building Regulations, notifiable work in a home, such as a new circuit, a consumer unit replacement or work in a bathroom’s special location, must be notified to building control. A registered installer self-certifies the work and makes the notification for you, and you receive a Building Regulations compliance certificate.

How often should the wiring be inspected?

For a home you live in, IET guidance recommends a periodic inspection at least every ten years, and when the property changes hands. Private landlords in England must have the installation inspected and tested at least every five years, give tenants a copy of the report, and have any required remedial work done within 28 days, or sooner if the report says so.

Registration and standards

  • Scheme NAPIT registered Registered electrical installer
  • Standard Work to BS 7671 The IET Wiring Regulations
  • Building Regulations Part P notified Notifiable work reported to building control

Get in touch

Send us a photo of the job.

A photo of the fuse board, the fault or the room, sent on WhatsApp, is often the quickest way to start. Or call, or use the enquiry form and we will come back to you.

  1. 01A photo of the fuse board, or of the problem
  2. 02Your postcode, so we know where the job is
  3. 03A sentence on what you would like done